MIMAKI JV400-130SUV, Operation Manual

Page: 39 / 194

2-9
1
2
Basic Operation
s
4
5
6
Setting a Media
4
Tighten the roll holder fixing screw.
• Check the Step 2 to 3 again.
5
Set the left end of the core of the roll media on the
let roll holder.
• Push the roll media onto the roll holder until the roll core is
all the way seated.
6
Loosen the screw of the right side roll holder then
insert the holder into the core of the roll media.
• When the roll holder is not firmly pressed against the core
of the roll media, the feeding media may be loosened and
thereby the media reaches to the floor. (
P.5-11)
7
Tighten the screw of the roll holder
8
Raise the clamp lever in the front of this machine.
9
Insert the roll media in this machine.
• The roll media can be smoothly inserted by slanting the media.
(1) Pull the media out of the roll to the head of the platen.
(2) Insert the media between the platen and the feed roller.
• Pull the media out of the roll so that the media can be grasped from the front of the machine.
(3) Push down the clamp lever from the back of this machine.
• The media is held.
Clamp lever
Pinch roller