MIMAKI JV400-130SUV, Operation Manual

Page: 54 / 194

2-24
Printing Data
Starting a Printing Operation
1
Setting a Media ( P.2-5)
2
Checking the Heater Temperature
• Check the CONSTANT lamp lights in [PRE], [PRINT], and
[POST] below the display.
3
Press the key in LOCAL.
• If the heater temperature has not reached the setting value, or, the
machine is waiting for the UV lamp lights and temperature to rise,
the right screen is displayed. Even if it has not reached, you can
move to REMOTE when pressing the
key.
• The screen changes to REMOTE, and data can be received from the PC.
4
Transmit data to be printed from the PC.
• The ACTIVE lamp blinks and the printing conditions are
displayed.
• For the method of data transmission, see the instruction
manual for the output software.
5
Start printing.
• When using a roll media, rewind the media by hand before printing so that it is not loose.When the roll
media has not been rewound tightly, it may cause the image quality to deteriorate.
• It takes 30 seconds to light up the UV
lamp.
• if you open the shading cover during
printing, the printing operation is
terminated and the machine returns to the
local display. At this time, the UV lamp is
turned off.
T EMPERA TURE CONTROL !
P L EASE WA I T
UV L AMP
PREPAR I NG
* REMOT E * 1 2 0 0 x 1 2 0 0 R
1 6 . B d . VD . x 2 x x . x x m
Resolution
Number of passes
The length of
media drawn
Scan direction
Ud : Unidirectional
Bd : Bidirectional
Data type
VD : Variable data
ND : Normal data
Scanning speed
x1 : Standard
speed
x2 : Double
speed
With/ without nozzle
recovery setting