5-14
Ink Error
Ink error is displayed also in the local guidance. (
P.3-41)
Message
Cause
Solution
The expiration date of an ink cartridge
has passed (two months have passed
after the specified expiration date).
• Two months have passed after the expira-
tion date. Replace the cartridge generating
the warning with a new one.
• Press the
key to check the car-
tridge generating the warning.
Carriage stopped because the media
jam occurred.
• Open the cover, remove the media and re-
set. (Supported from the firmware ver.3.00)
The jam sensor detects an error.
• Open the maintenance cover and check
around the carriage.
Print interrupted by the cover open or
detection of media jam.
• Close the cover or eliminate the media
jam.Select the action by the right or left
keys.
Message
Cause
Solution
The IC chip of the ink cartridge cannot
be read normally.
• Remove the cartridge generating the warn-
ing once and install it again.
• If the same warning message still appears,
contact your local distributor to call for ser-
vice.
The ink of the ink cartridge is different in
type from the ink currently supplied.
• Check the ink type of the cartridge generat-
ing the warning.
The ink of the ink cartridge is different in
color from the ink currently supplied.
• Check the ink color of the cartridge gener-
ating the warning.
An error occurred in the IC chip informa-
tion of the ink cartridge.
• Check the cartridge generating the warn-
ing.
• When you use white ink, check that there is
no nozzle missing etc.
An ink cartridge has not been installed
in the slot.
• Install an appropriate cartridge in the slot
generating the warning.
The ink of the ink cartridge has been
completely used up.
• Replace the cartridge generating the warn-
ing with a new one.
The ink of the ink cartridge has been
nearly used up.
• Replace the cartridge generating the warn-
ing with a new one.
Even when there are enough ink, ink
end has been detected.
• Check the ink pack set status in the eco
case.
The specified expiration date of an ink
cartridge has passed.
• The expiration date has passed.
• However, you can use it until the end of the
following month.
The expiration date of an ink cartridge
has passed (one month has passed
after the specified expiration date).
• One month has passed after the expiration
date.
• However, you can use it until the end of this
month. (The red LED blinks.)
The expiration date of an ink cartridge
has passed (two months have passed
after the specified expiration date).
• Two months have passed after the expira-
tion date.
Replace the cartridge generating the warn-
ing with a new one.
< L OC A L >
E x p i r a t i o n ( 2 M )
[ E N T ]
ME D I A J AM
C h e c k J a m S e n s o r
P R I N T I NG P A U S E
CON T I NU E <
> C A NC E L
I N K I C C A N ‘ T R E A D
: - - - - Y Y K K
WRONG I N K I C
: - - - - Y Y K K
K I ND O F
I N K
: - - - - Y Y K K
CO L OR O F
I N K
: - - - - Y Y K K
WRONG C A R T R I DGE
: - - - - Y Y K K
NO C A R T R I DGE
: - - - - Y Y K K
I N K E ND
: - - - - Y Y K K
I N K N E A R E N D
: - - - - Y Y K K
CH C K I N K P A C K
: - - - - Y Y K K
E x p i r a t i o n
: - - - - Y Y K K
E x p i r a t i o n : 1 MON T H
: - - - - Y Y K K
E x p i r a t i o n : 2 MON T H
: - - - - Y Y K K
Summary of Contents for JV400-130SUV
