MIMAKI JV400-130SUV, Operation Manual

Page: 124 / 194

4-24
5
Press the key.
• The carriage moves onto the platen.
6
Clean the cap rubber and cap rubber cover.
• Wipe off the ink sticking to the cap rubber and cap rubber
cover with a clean stick dipped in cleaning solution for
maintenance. Wipe off so that cleaning solution for
maintenance will not remain.
• At this time, the discharge passage is cleaned automatically.
7
Press the key.
8
Fill up the cap with cleaning solution for
maintenance
．
• If the maintenance solution cartridge is usable, maintenance
solution is automatically filled. If there is not enough
maintenance solution, press the
key to add
maintenance solution.
• If the maintenance solution cartridge is not usable, suck
maintenance solution into a dropper and fill up the cap with it.
Fill up the cap with maintenance solution on the verge of
overflow from the cap.
9
Close the right maintenance cover then press the
key.
10
Press to set the time for the cleaning
solution to be left as it is.
• Set value : 1 to 99 minutes (Unit: minute)
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 6 is completed, press the key. If you press the key
before cleaning is completed, the machine moves to the next washing procedure.
• Until washing liquid is filled, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the Step 8 is completed and you close the right maintenance cover, press
the
key. If you press the key before washing liquid is filled, the
carriage returns to the original position.
CAP C L EAN I NG
COMP L E T ED ( NEX T ) [ ENT ]
Cap rubber
Cap rubber cover
F i l l t h e l i q u i d
COMP L E T ED ( NEX T ) [ ENT ]
NOZ Z L E WASHE
L EAV I NG T I ME : 1m i n
NOZ Z L E WASHE
L EAV I NG T I ME : 2m i n