MIMAKI JV400-130SUV Operation Manual Download Page 120

Page: 120 / 194

Cleaning the Head and the Area around It (every day)

4-20

Wipe ink sticking to the side of the head off with a clean stick.

• To prevent gelled/ solid ink ground from pooling at the front and rear of the carriage, scrape them off with

clean stick etc.

• Clean the side surface of the head (shown in deep gray) with a clean stick.
• Never rub the nozzles.

Press the

key after the cleaning.

Close the left maintenance cover then press the

key.

• After its initial operation, the machine returns to step1.

The nozzle part (Never
touch it.)

Clean with a clean stick.

After cleaning

Before cleaning

C l o s e a c o v e r
COMP L E T ED

[ ENT ]

Summary of Contents for JV400-130SUV



































































































































































































Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands

MIMAKI JV400-130SUV, Operation Manual

Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands