Microview MVINVR-08POE4MP-E User Manual Download

Page: 30 / 233

Network Video Recorder User Manual



If you have forgotten your pattern, you can select the

Forgot My Pattern

Switch User

option to enter the normal login dialog box.



When the pattern you draw is different from the pattern you have configured, you should
try again.



If you have drawn the wrong pattern for more than 5 times, the system will switch to the
normal login mode automatically.

Purpose:

If device has logged out, you must login the device before operating the menu and other functions.

Select the

User Name

in the dropdown list.

Input password.

Click

Login

to log in.

When you forget the password of the admin, you can click

Forgot Password

to reset the password.

In the Login dialog box, if you enter the wrong password 7 times, the current user account will be
locked for 60 seconds.

Enter Wizard to Configure Quick Basic Settings

By default, the Setup Wizard starts once the device has loaded.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands