Microview MVINVR-08POE4MP-E User Manual Download

Page: 105 / 233

Network Video Recorder User Manual

104

It will send an exception or alarm signal to the remote alarm host when an event occurs. The

alarm host refers to the PC installed with Remote Client.

The alarm signal will be transmitted automatically at detection mode when remote alarm host is

configured. Please refer to Chapter

15.8

Configure Ports

for alarm host configuration.



Send Email

It will send an email with alarm information to the user when an alarm is detected.
Please refer to 15.7 Configure Email

for details of Email configuration.

Check the checkbox to select the alarm output when an alarm is triggered.

To trigger an alarm output when an event occurs, please refer to Chapter 11.6.3 Configure Alarm

Output

to set the alarm output parameters.

Click

Trigger Channel

and select one or more channels which will start to record/capture or

perform full-screen monitoring when motion alarm is triggered.

You have to set the recording schedule to realize this function. Please refer to

Refer to Chapter 7.4

Configure Recording Schedule

for settings of the recording schedule.

Click

Apply

to save the settings.

Configure Motion Detection Alarm

The motion detection enables the device to detect the moving objects in the monitoring area and

trigger the alarm.

Go to

System

Event

Normal Event>Motion Detection.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands