Microview MVINVR-08POE4MP-E User Manual Download

Page: 82 / 233

Network Video Recorder User Manual

Create Array

Enter the array name.

Select

RAID Level

RAID 0, RAID 1, RAID 5, RAID 6

, or

RAID 10

as required.

Select the physical disks to constitute array.

Required Number of HDD

RAID Level

Required Number of HDD

RAID 0

At least 2 HDDs.

RAID 1

At least 2 HDDs.

RAID 5

At least 3 HDDs.

RAID 6

At least 4 HDDs.

RAID 10

The number of HDD must be an even ranges from 4 to 16.

Click

Optionally, the device will automatically initialize the created array. Go to

Storage > RAID

Setup > Array

view the information of created arrray.

Array List

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands