Microview MVINVR-08POE4MP-E User Manual Download

Page: 95 / 233

Network Video Recorder User Manual

Search and play back the video file(s).

Click

to add the tag.

Edit the tag information.

Click

Max. 64 tags can be added to a single video file.

Edit Tag Files

Go to Playback.

Click

Tag

The available tags are white marked and displayed in the time bar.

Point the white marked tag in the time bar to access the tag information.

Edit Tag Files

Click

to edit the tag name.

Click

Play Tag Files

Go to

Playback

Click

Custom

Search

on the left bottom to enter the Search Condition interface.

Enter the search conditions for the tag files, including the time and the tag keyword.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands