Microview MVINVR-08POE4MP-E User Manual Download

Page: 56 / 233

Network Video Recorder User Manual

Call Preset (2)

Set a Patrol

Purpose:

Patrols can be set to move the PTZ to different key points and have it stay there for a set duration

before moving on to the next key point. The key points are corresponding to the presets.

Click

on the quick settings toolbar of the PTZ camera live view.

The PTZ control panel displays on the right of the interface.

Click

Patrol

to configure patrol.

Patrol Configuration

Select the patrol No. in the text field.

Click

Set

to enter the Patrol Settings interface.

Patrol Settings

Click

to add key point for the patrol.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands