Microview MVINVR-08POE4MP-E User Manual Download

Page: 151 / 233

Network Video Recorder User Manual

150



The camera connection will be disabled when the device works in the hot spare mode.



It is highly recommended

to restore the defaults of the device after switching the working

mode of the hot spare device to normal mode to ensure the normal operation afterwards.

Set Working Device

Go to

System > Hot Spare

Set the

Work Mode

Normal Mode

Check

Enable

Enter the IP address, user name, and password of hot spare device.

Hot Spare

Click

Apply

Manage Hot Spare System

Go to

System > Hot Spare

in hot spare device.

Check working devices from the device list and click

Add

to link the working device to the hot

spare device.

A hot spare device can connect up to 32 working devices.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands