Microview MVINVR-08POE4MP-E User Manual Download

Page: 43 / 233

Network Video Recorder User Manual

Configure Privacy Mask

Purpose:

The privacy mask can be used to protect personal privacy by concealing parts of the image from

view or recording with a masked area.

Go to

Camera

Privacy Mask

Select the camera to set privacy mask.

Click the checkbox of

Enable

to enable this feature.

Use the mouse to draw a zone on the window. The zones will be marked with different frame

colors.

Privacy Mask Settings Interface

Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.

Related Operation:

The configured privacy mask zones on the window can be cleared by clicking the corresponding

Clear Zone1-4 icons on the right side of the window, or click

Clear All

to clear all zones.

Click

Apply

to save the settings.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands