Microview MVINVR-08POE4MP-E User Manual Download

Page: 91 / 233

Network Video Recorder User Manual

Chapter 10 Playback

Play Video Files

Instant Playback

Instant Playback enables the device to play the recorded video files in last five minutes. If no video

is found, it means there is no recording during the last five minutes.

On the live view window of the selected camera, move the cursor to the window bottom to

access the toolbar.

Click

to start instant playback.

Playback Interface

Play Normal Video

Go to

Playback.

Check one or more cameras in the camera list to start playing the video.

Select a date in the calendar.



Use the toolbar in the bottom part of playback interface to control the playing and realize a

series of operations. Refer to Chapter 10.2 Playback Operations 8.2.



Click the channel(s) to execute simultaneous playback of multiple channels.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands