Microview MVINVR-08POE4MP-E User Manual Download

Page: 58 / 233

Network Video Recorder User Manual

The PTZ control panel displays on the right of the interface.

Click

Patrol

on the PTZ control panel.

Patrol Configuration

Select a patrol in the text field.

Click

Call

to call it.

(Optional) Click

Stop

to stop calling it.

Set a Pattern

Purpose:

Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the

PTZ movement according to the predefined path.

Click

on the quick settings toolbar of the PTZ camera live view.

The PTZ control panel displays on the right of the interface.

Click

Pattern

to configure pattern.

Pattern Configuration

Select the pattern No. in the text field.

Set the pattern.
1)

Click

Record

to start recording.

Click corresponding buttons on the control panel to move the PTZ camera.

Click

Stop

to stop recording.

The movement of the PTZ is recorded as the pattern.

Repeat steps 3-4 to set more patterns.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands