Microview MVINVR-08POE4MP-E User Manual Download

Page: 9 / 233

Network Video Recorder User Manual



ANR (Automatic Network Replenishment) function is supported, which enables the IP camera

save the recording files in the local storage when the network is disconnected, and

synchronizes the files to the device when the network is resumed.



Remote reverse playback via RTSP.



Supports accessing by the platform via ONVIF.



Remote search, playback, download, locking and unlocking of the record files, and support

downloading files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote HDD formatting and program upgrading.



Remote system restart and shutdown.



RS-232, RS-485 transparent channel transmission.



Alarm and exception information can be sent to the remote host.



Remotely start/stop recording.



Remotely start/stop alarm output.



Remote PTZ control.



Remote JPEG capture.



Virtual host function is provided to get access and manage the IP camera directly.



Two-way audio and voice broadcasting.



Embedded WEB server.

Development Scalability



SDK for Windows system.



Source code of application software for demo.



Development support and training for application system.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands