Microview MVINVR-08POE4MP-E User Manual Download

Page: 173 / 233

Network Video Recorder User Manual

172

Edit User (Admin)

Edit the admin user information as demand, including the new admin password (strong

password is required), and MAC address.

Edit the unlock pattern for the admin user account.
1)

Check the checkbox of

Enable Unlock Pattern

to enable the use of unlock pattern when

logging in to the device.

Use the mouse to draw a pattern among the 9 dots on the screen, and release the mouse

when the pattern is done.

Please refer to Chapter 2.2 Step 2In the

IP Camera Activation

text field, enter the password to

activate the IP camera (s) connected to the device.

Optionally, check the

Export GUID

to export the GUID for future password resetting.

Click

to save the password and activate the device.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands