Microview MVINVR-08POE4MP-E User Manual Download

Page: 217 / 233

Network Video Recorder User Manual

216



Update the digital zoom operation in image.

Version 3.3.9

Updated:



Support H.265 video encoding format.

Deleted:



Delete the PPPoE settings.

Version 3.3.7

Added:



Add the new models of DS-8600NI-K8, DS-7700NI-K4(/P) and DS-7600NI-K2(/P).



Add the front panel and rear panel of the new models.



Add the specifications of the new models.

Version 3.3.6

Added:



Add front panel and rear panel of DS-9600NI-I16.

Updated:



DS-9600NI-I16 supports RAID6, capture, picture playback, eSATA HDD and eSATA backup, two

self-adaptive 10M/100M/1000M network interfaces.

Version 3.3.4

Added:



Add the new models of MVINVR-08POE04MP-E (/P) and DS-7700NI-I4 (/P).



Add the support of Cloud P2P.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands