Microview MVINVR-08POE4MP-E User Manual Download

Page: 18 / 233

Network Video Recorder User Manual

Go to

System

General

Type a number (255 digits maximum) into the Device No. field.

On the IR Remote:

Press the DEV button.

Use the Number buttons to enter the Device ID# that was entered into the device.

Press Enter button to accept the new Device ID#.

Remote Control

Unpairing (Disabling) an IR Remote from a Device

To unpair an IR Remote from a device so that the unit cannot control any device functions, proceed

as follows:
Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit’s memory

and it will no longer function with the device.

(Re)-enabling the IR Remote requires pairing to a device. See “Pairing the IR Remote to a Specific
device (optional),” above.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands