Microview MVINVR-08POE4MP-E User Manual Download

Page: 169 / 233

Network Video Recorder User Manual

168

Operator:

The

Operator

user level has permission of Two-way Audio in Remote

Configuration and all operating permission in Camera Configuration by default.

Guest:

The Guest user has no permission of Two-way Audio in Remote Configuration and

only has the local/remote playback in the Camera Configuration by default.



User’s MAC Address:

The MAC address of the remote PC which logs onto the device. If it is

configured and enabled, it only allows the remote user with this MAC address to access the

device.

Click

to finish the new user account adding.

Result

: In the User Management interface, the added new user is displayed on the list.

User List

Set the Permission for a User

For the added user, you can assign the different permissions, including the local and remote

operation for the device.

Go to

System

User

Select a user from the list and then click the button to enter the permission settings

interface.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands