Microview MVINVR-08POE4MP-E User Manual Download

Page: 78 / 233

Network Video Recorder User Manual

Configure Redundant Recording and Capture

Purpose:

Enabling redundant recording and capture, which means saving the record files and captured

pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data

safety and reliability. .

You must set the storage mode to

Group

before you set the HDD property to Redundancy. For

detailed information, please refer to Chapter 7.2.1 Configure HDD Group. There should be at least
another HDD which is in Read/Write status.

Go to

Storage

Storage Device

Select a

HDD

from the list and Click

to enter the Local HDD Settings interface.

Set the HDD property to

Redundancy

HDD Property-Redundancy

Go to

Storage

Schedule Settings > Record Schedule

Capture Schedule

Click

Advanced

to set the camera recording parameters.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands