Microview MVINVR-08POE4MP-E User Manual Download

Page: 77 / 233

Network Video Recorder User Manual

Configure Holiday Recording and Capture

Purpose:

Follow the steps to configure the record or capture schedule on holiday for that year. You may

want to have different plan for recording and capture on holiday.

Go to

System

Holiday Setting

Select a holiday item from the list and click

Check the

Enable

to configure the holiday.

Edit Holiday Settings

Edit the holiday name.

Select the mode to by date, by week or by month.

Set the start and end date of the holiday.

Click

Set the schedule for the holiday recording. Refer to Chapter 7.4 Configure Recording Schedule

for details.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands