Microview MVINVR-08POE4MP-E User Manual Download

Page: 61 / 233

Network Video Recorder User Manual

Park (Patrol 1):

The dome starts moving according to the predefined patrol 1 path after the

park time.

Park (Preset 1):

The dome moves to the predefined preset 1 location after the park time.

The park time can only be set via the speed dome configuration interface. The value is 5s by
default.

Click

Stop

Park (Quick Patrol)

Stop

Park (Patrol 1)

Stop

Park (Preset 1)

to inactivate it.

Auxiliary Functions

Before you start

Please make sure the connected IP camera supports the PTZ function, and is properly connected.

Purpose

You can operate the auxiliary functions including light, wiper, 3D positioning, and center on the PTZ

control panel.

Click

on the quick settings toolbar of the PTZ camera live view.

The PTZ control panel displays on the right of the interface.

Click

Aux Function

Aux Function Configuration

Click the icons to operate the aux functions. See the table for the description of the icons.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands