Microview MVINVR-08POE4MP-E User Manual Download

Page: 64 / 233

Network Video Recorder User Manual

Select the NAS disk from the list shown below, or you can manually enter the directory in the

text field of NetHDD Directory.

Click the

to complete the adding of the NAS disk.

Result

After having successfully added the NAS disk, return to the HDD Information menu. The added

NetHDD will be displayed in the list.

Adding IP SAN

Go to

Storage

Storage Device

Click

Add

to enter the Custom Add interface.

Select the NetHDD from the drop-down list.

Select the type to IP SAN.

Enter the NetHDD IP address in the text field.

Click

Search

to search the available IP SAN disks.

Select the IP SAN disk from the list shown below.

Click

to complete the adding of the IP SAN disk.

Up to 1 IP SAN disk can be added.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands