Microview MVINVR-08POE4MP-E User Manual Download

Page: 100 / 233

Network Video Recorder User Manual

In the Smart/Custom video playback mode, click

to set the play strategy.



When

Do not Play Normal Videos

is checked, the device will skip the normal video and play

the smart (motion/line crossing/intrusion) video and the custom (searched video) only in

the normal speed (X1).



When

Do not Play Normal Videos

is unchecked, you can set the play speed for the normal

video the smart/custom video separately. The speed range is from X1 to XMAX.

You can set the speed in the single-channel play mode only.

Play Strategy

Edit Video Clips

You can take video clips during the playback and export the clips.

In the video playback mode, click

to start video clipping operation.



: Set the start time and end time of the video clipping.



: Export the video clips to the local storage device.

Switch between Main Stream and Sub-Stream

You can switch between the main stream and the sub-stream during the playback.

: Play the video in main stream.

: Play the video in sub-stream.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands