Microview MVINVR-08POE4MP-E User Manual Download

Page: 42 / 233

Network Video Recorder User Manual

Chapter 4 Camera Settings

Configure OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date/time,

camera name, etc.

Go to

Camera

Display.

Select the camera from the drop-down list.

Edit the name in the

Camera Name

text field.

Check the checkbox of the

Display Name

Display Date

and

Display Week

if you want to show

the information on the image.

Set the date format, time format, and display mode.

OSD Configuration Interface

You can use the mouse to click and drag the text frame on the preview window to adjust the

OSD position.

Click the

Apply

button to apply the settings.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands