Microview MVINVR-08POE4MP-E User Manual Download

Page: 126 / 233

Network Video Recorder User Manual

125

Sensitivity:

Similarity degree of the background image. The higher the value is, the more

easily the detection alarm can be triggered.

Click

Draw Region

and draw a quadrilateral in the preview window by specifying four vertexes of the

detection region.

Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.

Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.

Click

Apply

Object Removal Detection

Purpose:

Object removal detection function detects the objects removed from the pre-defined region, such

as the exhibits on display, and a series of actions can be taken when the alarm is triggered.

Go to

System > Event > Smart Event

Click

Object Removable

Object Removal Detection

Select a

Camera

to configure.

Check

Enable Object Removable Detection

Optionally, check

Save VCA Picture

to save the captured pictures of object removable

detection.

Summary of Contents for MVINVR-08POE4MP-E










































































































































































































































Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands

Microview MVINVR-08POE4MP-E, User Manual

Search results

Summary of Contents for MVINVR-08POE4MP-E

Reviews:

Related manuals for MVINVR-08POE4MP-E

Brands by name

Popular brands