Microtronics myDatalogNANOamr, User Manual

Page: 89 / 125

Chapter 12 XML interface
scale1 - scale4
Metered measurand of a pulse in the "unit" that is used by all of the server display elements
Important note: Please note that this value is divided by the "Impulse scale" parameter
(see "Measurement channels" on page 48) for the display/input ("Impulse" parameter)
on the web interface of the myDataweb server (see "Measurement channels" on page
48) or the WebApp ("Configuring the measurement channels" on page 72).
Note: Assumption: The meter provides one pulse per 5l. The pulse quality should be displayed in [l] , while
the meter reading is displayed in [m ] on the myDataweb server interface.
Parameter (web interface) Value
Impulse 5
Imp.unit l
Impulse scale 0.001
Unit m
Required configuration
Parameter (mydatalognanoamr_channel) Value
scale1 0.005000
filter_time1d - filter_time4d
Minimum signal length for signal detection [ms]
12.2.2.3 mydatalognanoamr_log
This table includes the log entries and error codes (see "Log entries and error codes " on page 114)
of the device.
log
Log entry
par
Parameter for the log entry
12.2.2.4 mydatalognanoamr_user1
This table includes the remaining configuration that is specific to the myDatalogNANOamr device
class and is not included in the "mydatalognanoamr_channel" table (see "mydatalognanoamr_
channel" on page 88). The configurations from the "mydatalognanoamr_user1" table are
transferred to the myDatalogNANOamr .
The device-specific configuration from the "mydatalognanoamr_channel" and
"mydatalognanoamr_user1" tables are supplemented with the configuration from the "deviceid"
(see "geraetid" on page 83) table that is the same for all of the myDatanet devices.
Rev. 01 89