Microtronics myDatalogNANOamr, User Manual

Page: 78 / 125

transfer_alerts
Alarm in the event that the device does not respond for longer than the set transmission cycles
Value Explanation
0 No alarm settings
1 standard (>2x transmission cycles)
2 immediately (>1x transmission cycle)
3 medium (>5x transmission cycles)
4 long (>10x transmission cycles)
5 extra long (>20x transmission cycles)
max_transfer_volume
Settings for the transfer volume alarm
Value Explanation
-1 The configuration for the transfer volume alarm is adopted from the global server
setting
0 The transfer volume alarm is deactivated.
> 0 Threshold at which the transfer volume alarm should be triggered [KB]
max_transfer_volume_kb
This is a "Ghost" field, the content of which always corresponds to that of the "max_transfer_
volume" field.
comment
Free comment field (is also displayed below the device type in the site list)
loc_site_lat
Specification of the geographical latitude where the site is located [°]
loc_site_long
Specification of the geographical longitude where the site is located [°]
loc_alarm_rad_mode
A radius can be defined for a site. Depending on the settings for this parameter, an alarm is
triggered if the device leaves this radius.
Value Explanation
0 Radius monitoring deactivated (no alarm)
> 0 Specification of the alarm radius [km]. An alarm is triggered if the device leaves the
radius.
78 Rev. 01