Microtronics myDatalogNANOamr, User Manual

Page: 55 / 125

Chapter 9 User interfaces
Last
connection In each case, the last time stamp of the affected operation
Last wakeup
Last
disconnection
Last
transmission
error
Last Aloha
connection
Firmware
update
Off Firmware update is deactivated
On As soon as a new version of the selected firmware type is
available, this is installed immediately.
Even if tag is missing Firmware is also transmitted to the device if the device has
not transmitted the current firmware version to the server.
(NOT RECOMMENDED!)
Allow downgrade Facilitates the installation of an older firmware version than
the one on the device. (NOT RECOMMENDED!)
Once Performs a single firmware update. If no new firmware is
available or the firmware was installed successfully, the
firmware update is automatically switched to "OFF".
Firmware type Released Only firmware versions that have successfully undergone
internal and field testing are installed (this practically
eliminates malfunctions).
Release candidate Only firmware versions that have successfully undergone
internal testing are installed (malfunctions cannot be
excluded).
Beta release Even firmware versions that have not successfully
undergone all of the internal tests are installed
(malfunctions may occur).
9.2.2.3 Device-specific settings
Operating
type HOLD Measurement: OFF, transmission: ON
RUN Measurement: ON, transmission: ON
OFF Measurement: OFF, transmission: OFF
OFFLINE Measurement: ON, transmission: OFF
Aloha Reserved for internal use
Rev. 01 55