Microtronics myDatalogNANOamr, User Manual

Page: 100 / 125

method=…
The compression methods can be specified per channel:
1 Minimum within the compression period
2 Maximum within the compression period
4 Average over the compression period
8 Median over the compression period
16 Total over the compression period
Several methods can be used simultaneously. Individual values must be added up for this
purpose. That means that
(ch0(method=1) | ch0(method=2))
is equivalent to
(ch0(method=3))
.
If the compression method "Total" (16) is activated, the summation method
sum_mode=…
must be specified in addition to the
method=…
compression method.
sum_mode=…
1 1/sec (e.g. One channel is recorded in m
3
/s; the total period equals m
3
.)
2 1/min (e.g. One channel is recorded in m
3
/min; the total period equals m
3
.)
3 1/h (e.g. One channel is recorded in m
3
/h; the total period equals m
3
.)
5 1/day (e.g. One channel is recorded in m
3
/day; the total period equals m
3
.)
4 Total of a day counter (counting channel is reset once per day)
6 Total of an interval counter (counting channel is reset after each recording)
12.3.1.3 Updating data fields
A HTTP-GET command can also be used to update the fields of a data record. For this purpose, the
HTTP-GET command must be extended by the relevant field assignment starting with a dollar sign
$
. Any number of fields can be overwritten at once.
Note: The user must have the relevant rights to modify the data (see tbd).
12.3.1.3.1 Example
The following example sets the "Firmware update" to "ON" and the "Firmware type" to "Release
candidate" for all of the devices that are compatible with the myDatalogNANOamr type site.
https://server-URL:8080/geraetid[devclass=6000]?user=u1&password=p1
&$fw_update=1&$fw_release_type=1
Result:
<Result>
<updated>2</updated>
</Result>
Explanation:
100 Rev. 01