Microtronics myDatalogNANOamr, User Manual

Page: 83 / 125

Chapter 12 XML interface
title7
Freely selectable channel title for the battery voltage
units7
Battery voltage: String, which is used as the measurement unit by all of the server display
elements
The following parameters apply to the "Calculated channels" (see "Calculated channels" on page
50)
title60 - title64
Freely selectable channel title for the calculated channels [0-16 characters]
units60 - units64
String, which is used as the measurement unit by all of the server display elements
min60 - min64
Defines the lower scale end of the pointer instruments
max60 - max64
Defines the upper scale end of the pointer instruments
decpl60 - decpl64
Number of decimal places that are used by all of the server display elements
Value Explanation
-1 Standard
0 No decimal places
: :
6 6 decimal places
alarm_low60 - alarm_low64
An alarm is initiated if the measurement value drops to or below this value.
alarm_high60 - alarm_high64
An alarm is initiated if the measurement value meets or exceeds this value.
hysterese60 - hysterese64
Hysteresis for all-clear (e.g. hyst = 5%, alarm or warning at 100 -> all-clear at 95)
12.2.1.2 geraetid
This table includes general information and configurations that are the same for all devices of the
myDatanet range.
kunde
Unique data record number of the customer to whom the device is assigned (read only)
devsn
Serial number of the instrument
Rev. 01 83