Microtronics myDatalogNANOamr, User Manual

Page: 92 / 125

gps_lat
Determined geographical latitude where the device is located [°]
gps_long
Determined geographical longitude where the device is located [°]
gps_elev
Determined height above sea level [m]
gps_quality
Specifies the quality of the determined position data. The position for devices without a GPS
receiver is calculated based on the information from the GSM cells in the receiving range.
Value Explanation
0, 1 Position could not be determined.
10 Only the country in which the device is located could be determined.
20, 30 The position has been limited to a larger area within a country.
>=100 Position could be calculated from the information of the GSM cells in the
receiving range
>31,000 Position determined by the GPS receiver
1)
1)
The myDatalogNANOamr does not include a GPS receiver.
Information about the five GSM cells in the receiving range that were used to determine the position
gsm_mcc_0 - gsm_mcc_4
MCC (mobile country code) of the GSM cell
gsm_rssi_0 - gsm_rssi_4
Received GSM field strength [dBm] for the GSM cell
gsm_mnc_0 - gsm_mnc_4
MNC (mobile network code) of the GSM cell
gsm_ta_0 - gsm_ta_4
TA (timing advance) of the GSM cell
gsm_lac_0 - gsm_lac_4
LAC (location area code) of the GSM cell
gsm_cellid_0 - gsm_cellid_4
Cell ID of the GSM cell
12.2.2.8 mydatalognanoamr_set
This table is provided to set the meter readings to the required value.
92 Rev. 01