Microtronics myDatalogNANOamr, User Manual

Page: 25 / 125

Chapter 6 Storage, delivery and transport
Chapter 6 Storage, delivery and transport
6.1 Inspection of incoming deliveries
Please check the shipment immediately after receiving for completeness and intactness. Imme-
diately report any discovered transport damages to the delivering carrier. Also notify the man-
ufacturer in writing about this without delay. Report any incompleteness in the delivery to the
responsible representative or directly to the company headquarters of the manufacturer within 2
weeks (see "Contact information" on page 125).
Note: Any claims received thereafter will not be acknowledged!
6.2 Scope of supply
The standard scope of supply of the myDatalogNANOamr (206.271) includes:
l
myDatalogNANOamr
l
Antenna 900 FME (206.801)
l
BP434RLC (206.725)
1)
1)
The battery pack (BP434RLC ) was already inserted in the myDatalogNANOamr during production.
Additional accessories such as internal expansions, assembly sets, antennas, accu or battery pack,
sensors, power supply, charging devices, etc., depending on the order. Please check these against
the delivery slip.
6.3 Storage
The following storage conditions must be observed:
myDatalogNANOamr Storage temperature -30...+85°C
Humidity 15...90%rH
Note: The battery pack remains in the myDatalogNANOamr during storage.
Store the measurement technology so that it is protected against corrosive and organic solvent
vapours, radioactive emissions and strong electromagnetic radiation.
6.4 Transportation
The myDatalogNANOamr is designed for rough industrial applications. Nevertheless, it should not
be subjected to heavy shocks, bumps, impacts or vibrations. The original packaging must always be
used for transport.
Rev. 01 25