Microtronics myDatalogNANOamr, User Manual

Page: 90 / 125

context
Unique data record number of the site (read only)
measure_mode
Operating type
Value Explanation
0 HOLD Measurement: OFF, transmission: ON
1 RUN Measurement: ON, transmission: ON
2 OFF Measurement: OFF, transmission: OFF
3 OFFLINE Measurement: ON, transmission: OFF
4 Reserved for internal use
record_interval
Time between measurements (00:00 same as record interval) [1...1090min]
transfer_interval
Time between transmissions [00:10...168:00 hh:mm]
pos_cycle
Position update interval [00:00...168:00 hh:mm]
tx_mode
Connection type (read only)
Value Explanation
0 The device registers in the transmission cycle.
alive_time
Aloha/Wakeup duration connection[00:60...90:00 mm:ss]
switch_mode
Operation that is triggered when the solenoid switch is activated, (read only)
Value Explanation
1 Initiation of ALOHA transmission mode
tx_time
Time at which the device establishes a connection to the server regardless of the transmission
cycle. However, this additional transmission is only completed if a transmission has not
already been completed 5 minutes before this time or if a transmission will not be completed
10 minutes after this time.[hh:mm]
sample_time
Sample time for which the output voltage U
out
is activated during the sample interval to
determine the levels at the meter inputs (see "Technical details about the meter inputs" on
page 37) [30...1000µs].
90 Rev. 01