Microtronics myDatalogNANOamr, User Manual

Page: 73 / 125

2 Title of the site 8 Selection of the reader type (see "Config" on
page 49)
3)
3 Title of the measurement channel 9 Unit in which the metered measurand of a
pulse has to be entered
2)
4 Time stamp of the last measurement value 10 Metered measurand of a pulse in the "Imp.
unit"
3)
5 Last measurement value (meter reading)
1)
11 Input field to change the title of the
measurement channel
3)
6 Colours of the pair of wires for the
measurement channel
1)
The measurement channel is deactivated if no meter reading is displayed. It cannot be activated via the WebApp but can
only be activated via the standard web interface (see "Measurement channels" on page 48).
2)
Can only be edited via the standard web interface (see "Measurement channels" on page 48)
3)
The input fields can only be edited when the myDatalogNANOamr is in ALOHA transmission mode.
11.4.2.1 User level 1
Users of authorisation level 1 can only edit the pulse value and meter reading.
Screen for configuring a measurement channel (ALOHA, level 1)
Rev. 01 73