Microtronics myDatalogNANOamr, User Manual

Page: 48 / 125

9.2.1.3 Measurement channels
9.2.1.3.1 Basis
Title 1-4
Freely selectable channel title for the meter inputs
Mode
Off Measurement channel deactivated
Cnt.Inf Infinite counter
Impulse Metered measurand of a pulse in the "Imp. unit"
Imp.unit String that the WebApp displays as the measuring unit when specifying the
pulse value (see "Configuring the measurement channels" on page 72)
Impulse
scale Factor with which the metered measurand of a pulse is multiplied to convert
the "Imp. unit" to the "Unit" that is used by all of the display elements of
the server (see "Additional information on configuring a meter input:" on
page 48)
Max Defines the upper scale end of the pointer instruments
Unit String, which is used as the measurement unit by all of the server display
elements The WebApp also uses this string to display the meter readings.
Decimal
places Number of decimal places that are used by all of the server display elements
Basic settings for the measurement channel
Note:
Additional information on configuring a meter input:
Assumption: The meter provides one pulse per 5l. The meter reading should be displayed in [m ] on the
myDataweb server interface
Parameter Value
Impulse 5
Imp.unit l
Impulse scale 0.001
Unit m
Required configuration
48 Rev. 01