Microtronics myDatalogNANOamr, User Manual

Page: 79 / 125

Chapter 12 XML interface
loc_alarm_rad
This is a "Ghost" field, the content of which always corresponds to that of the "loc_alarm_rad_
mode" field.
view
Selection of the report that is loaded by clicking on the device link in the maps
Value Explanation
*OFF* The default graphic is loaded.
"viewid" The selected report is loaded.To obtain the "viewid", open the required report
(see ""Site" area at customer level" on page 59) and take the ID from the
address line of the browser (e.g.
....&viewid=
A1A5AD6CD299EF96
&....
).
test_alarm
A test message is sent to all recipients ("parallel" alarm call plan type) and/or the first recipient
("serial" alarm call plan type) as soon as this page is saved. The check box is subsequently
reset automatically.
scale_units1 - scale_units4
String that the WebApp displays as the measuring unit when specifying the pulse value (see
"Configuring the measurement channels" on page 72) [0-16 characters]
scale_factor1 - scale_factor4
Factor with which the metered measurand of a pulse is multiplied to convert the "Imp. unit" to
the "Unit" that is used by all of the display elements of the server (see "Additional information
on configuring a meter input:" on page 48)
Value Explanation
6 1000000
5 100000
4 10000
3 1000
2 100
1 10
0 1
-1 0.1
-2 0.01
-3 0.001
-4 0.0001
-5 0.00001
-6 0.000001
Rev. 01 79