Microtronics myDatalogNANOamr, User Manual

Page: 17 / 125

Chapter 4 General specifications
Note: The integrated SIM chip provides a mobile communications connection to a variety of
international service providers. In order to be able to utilise all functions of the device, you
must ensure that the device is located in the service area of one of these service providers.
You can find a list of all supported countries and associated service providers under
www.microtronics.at/footprint. A Managed Service contract with Microtronics Engineering
GmbH is required for use of the mobile data transmission (see
www.microtronics.at/managedservice). This includes the provisioning of the mobile
communications connection via the network of the service provider included in the above-
mentioned list.
4.7 General product information
The device is a compact, portable device for recording and transferring meter pulses. The energy
supply is provided via an integrated, replaceable battery pack, that facilitates a device operating
time of up to 3,76 years (see "Technical details about the device operating time" on page 38) using
the default configuration (1 channel, 200 ms reader type, 6 h transmission cycle). 4 inputs are
available to which a meter contact can be connected without an additional energy supply (see
"Technical details about the meter inputs" on page 37). The internal "Battery" and "GSM level"
measurement values (see "Internal channels" on page 52) are also determined. All of the generated
measurement data is temporarily saved on an internal data memory and is then wirelessly
transferred to a central location at a freely selected interval. The device is also configured via this
connection. The device is equipped with an integrated SIM chip.
4.8 Device labelling
The specifications in this user manual apply exclusively to the myDatalogNANOamr device type. The
type plate is located on the top of the device and includes the following specifications:
l
Type designation
l
Serial number
l
Environmental conditions during operation
l
Hardware revision
l
CE marking
l
Protection class
The correct specification of the type designation and serial number is important for all queries and
spare part orders. Only then can we process requests promptly and properly.
Type plate myDatalogNANOamr
Rev. 01 17