Microtronics myDatalogNANOamr, User Manual

Page: 105 / 125

Chapter 12 XML interface
Site to which the data record should be linked:
<Result>
<mydatalognanoamrid id="A1526911CF9CCAA0" stamp="13.2.2013 10:00:54" >
<tag> FFFF6000 </tag>
<name title="Name"> Site1 </name>
:
:
</mydatalognanoamrid>
</Result>
XML file:
<?xml version="1.0"?>
<Result>
<mydatalognanoamr_data id="0" stamp="16.1.2013 09:00">
<ch1>0.0000</ch1>
<tag>00006000</tag>
<context>A1526911CF9CCAA0</context>
</mydatalognanoamr_data>
</Result>
mydatalognanoamr_data
Not relevant for the data import. However, it is recommended to use the relevant table
identifier.
id
id="0"
must always be specified when importing data. A new data record with an
automatically generated ID is created.
stamp
OPTIONAL
Time stamp that should be used for the data record. It must be ensured that the time stamp of
the data is always in ascending order. If the attribute is omitted, the current time is used as the
time stamp for the data record.
ch1
The actual measurement data (in this case only the meter reading of channel 1) that should be
imported.
tag
Specifies the table in which the data record is saved
context
Specifies with which site or with which device the data record is to be linked (see "Site with
which the data record should be linked")
Rev. 01 105