Microtronics myDatalogNANOamr, User Manual

Page: 81 / 125

Chapter 12 XML interface
reader_type1 - reader_type4
Selection of the reader type
Important note: This parameter only specifies the selection for the display on the
myDataweb server. To function correctly, the minimum signal length for the signal
detection (time specification provided in brackets in the following table) in the
"mydatalognanoamr_channel" table and the sample time in the "mydatalognanoamr_
user1" table must also be set. Both of these operations are completed automatically
when configuring the reader type (see "Config" on page 49) via the web interface of
the myDataweb server.
The sample time that must be used for the relevant reader type is specified in the
chapter "Config" on page 49. As the same sample time is used for all meter inputs, the
longest of the required sample times must be entered in the "mydatalognanoamr_
user1" table.
Value Explanation
0 slow (200 ms)
1 medium (64 ms)
2 fast (4 ms)
3 fast plus (4 ms)
10 Elster Grey Snapfit (4 ms)
11 Elster Black Snapfit (4 ms)
12 Elster T. PROBE (4 ms)
13 Elster LRP (4 ms)
14 Elster Q4000 (4 ms)
15 Elster HRP (4 ms)
16 Elster ODO7 (4 ms)
17 Elster HELIX 4000 (4 ms)
18 Elster PR6 (4 ms)
19 Elster PR7 (4 ms)
20 Itron CYBLE K1000 (64 ms)
21 Itron EMES UNIT (64 ms)
22 Sensus HRI (15 ms)
23 Sensus HRI-Mei (15 ms)
24 Sensus OD01 (4 ms)
25 Sensus RD01 (4 ms)
26 Arad BASIC (4 ms)
27 Arad 40/50 (4 ms)
28 Aquamaster (8 ms)
Rev. 01 81