MICRO-EPSILON 4350127.347, Operating Instructions Manual

Page: 54 / 68

Page 54
Installation and Initial Operation
thicknessCONTROL MTS 8202.LLT / 4350127.347
+84.0
+88.0
+92.0
+96.0
+100.0
+104.0
+108.0
+112.0
+116.0
+120.0
+124.0
PLC <= ME
Address
Name Type Description
+0.0 Alive Signal Bit Alive Signal: Pulse with about 1 Hz.
+0.1 Centralized Fault Bit 0: no error
1: system fault, e.g. motor fault, …
(details will be shown in GUI)
+0.2 System Ready Bit 1: system ready for measurement
+0.3 Measurement Active Bit 1: measurement is active
+0.4 Out of Tolerance Bit 1: thickness value is out of limits
+0.5 Sensor Dirty Bit 1: sensor is dirty, please clean - can
only be checked during calibration
+0.6 Axis in Parking
Position Bit 1: axis in parking position
+0.7 Calibration Active Bit 1: calibration in process
+1.0 Fix Position Measu-
rement Active Bit 1: measurement in fix position is
active
+1.1 Temperature too
high Bit 1: temperature of sensors too high
+1.2 Light Barriers 3 C-
Frame in Danger Bit 1: Light barrier of C-Frame detects
material - C-Frame is moved into par-
king position.
+1.3 Emergency Stop
Push Button Active Bit 1: push button for emergency stop is
active
+1.4 Air Pressure State
Failed Bit 1: input of compressed air pressure is
too low
+1.5 Air Preperation Filter
1 µm NIO Bit 1: air preperation filter with 1 µm is
dirty
+1.6 Air Preperation Filter
0,01 µm NIO Bit 1: air preperation filter with 0,01 µm is
dirty
+1.7 Bit
16 Bit Reserve
+4.0 Current Thickness REAL current thickness [mm]
+8.0 Current Position REAL current position of C-Frame [mm]
+12.0
+16.0 Used Setpoint
Thickness REAL used setpoint for thickness [mm]
+20.0 Thickness Track 1 REAL thickness of track 1 [mm] (position
defined in system parameters or
interface)