Page 5
Overview, Technical Data, Safety Instructions
thicknessCONTROL MTS 8202.LLT / 4350127.347
1.
Overview, Technical Data, Safety Instructions
1.1
Introduction
This documentation describes the non-contact thickness measurement of endless belt/
strips and plates. Please observe the following safety instructions when you use the
measuring system. In addition to this information, it is important that you follow the in-
structions in the individual chapters of the manual.
The measuring system described in this manual complies with the requirements of the
“DIN EN 60204.1 Electrical equipment of machines” standard and has been delivered in
a fault-free condition. In order to maintain this condition and ensure reliable usage, the
operator must observe the instructions and warnings on the measuring system and in
this manual.
It is necessary to contact Micro-Epsilon Messtechnik GmbH & Co. KG before the meas-
uring system is modified or is combined in any way with parts and/or systems which
have not been approved by Micro-Epsilon or which are not described in this manual.
This manual is an important part of the measuring system and must be read carefully
before the measuring system is put into operation for the first time. This manual contains
important information concerning safety and maintenance. It must be kept at the measur-
ing system for this reason.
1.1.1 Validity
This manual is valid for MTS 8202.LLT, Item No. 4350127.347, manufactured by Mi-
cro-Epsilon Messtechnik GmbH & Co. KG. The manufacturer reserves the right to make
technical changes for the purpose of further development. In this case, an appendix to
this manual will be provided. The purchaser is required to check the version of the man-
ual and to include every addendum concerning technical innovations. The manufacturer
shall accept no liability for the correctness and completeness of the information stated in
this manual. The reader is requested to inform Micro-Epsilon Messtechnik GmbH & Co.
KG if any errors are found.
1.1.2 Software Security
The following important information must be observed for all application software based
on thicknessCONTROL. The modification of hardware or software components in the
thicknessCONTROL industrial PC is essentially not permitted. Exceptions must be
approved of in writing by Micro-Epsilon Messtechnik GmbH & Co. KG. The automat-
ic start of software components that do not originate from Micro-Epsilon Messtechnik
GmbH & Co. KG and which run in the background of the measurement process is not
permitted. When using virus scanners, the operator must be aware that the measuring
system will be restricted and that malfunctions may occur with respect to real-time ca-
pabilities. Thus the measuring system cannot be reliably operated during this time. The
integration of systems from Micro-Epsilon Messtechnik GmbH & Co. KG into networks
must only be performed by qualified personnel. In doing so, the system operator is re-
sponsible for security on the network.
Micro-Epsilon Messtechnik GmbH & Co. KG shall accept no claims arising from non-ob-
servance of these safety instructions.
Summary of Contents for 4350127.347
