MICRO-EPSILON 4350127.347, Operating Instructions Manual

Page: 19 / 68

Page 19
Overview of Mechanical Components
thicknessCONTROL MTS 8202.LLT / 4350127.347
3.7 Transport, Transport Lock
Avoid damage when transporting the measuring system, particularly to any protruding
parts.
Persons required Equipment and tools required
- Forklift, 600 kg minimum payload
- Rechargeable electric screwdriver with
Torx™ T20 bit
- SW13 wrench
- 2 round slings
- Cross member
Mass of the measuring system approx. 250 kg including packaging
Only raise the measuring system a few centimeters; this prevents the measuring system
from tipping over.
Avoid any unnecessary jolting of the measuring system, for example due to fast lowering
of the measuring system from a forklift.
The measuring system must not be lifted on one side and then pulled.
i
You will need at least two people and a forklift to transport the measuring system.
Transport the measuring system and its packaging to the destination with a forklift.
Open the wooden crate of the measuring system. Use a rechargeable electric
screwdriver, bit size T20.
i
Avoid any lateral forces on the sidewalls of the wooden crate.
Fig. 20 Measuring system in the wooden crate
Loosen the transport locks on the lashing straps/cable ties, etc. on the base frame ,
see 4.2 .
Place the round slings onto the four transport eyebolts. Attach the round slings to a
cross-member. Do not lift the measuring system.
Ensure that the load direction points straight up.
CAUTION
Crushing or impact
hazard caused by
uncontrolled movement
or moving parts of the
measuring system.
Transport the measuring
system and its packag-
ing and any transport
safety devices to the
destination.