Page 33
Installation and Initial Operation
thicknessCONTROL MTS 8202.LLT / 4350127.347
Fig. 37 Data maintenance
Following data can be saved in an article:
Default measuring
width
This value is used for first traversing, afterwards only the
product width is used for traversing.
Number of measuring
points
Number of measuring points which are evenly distributed
over width of the product.
Additive correction
consonant
The result of the thickness measurement is corrected ad-
ditively with this consonant. Thereby differences between
contact and non-contact measurements can be compen-
sated.
Display interval
In the views of length trend this interval is used to display
data. Depending on the settings, this specification is either
in [m] or [min]. When 100 meters are entered the length
trend displays the last produced 100 meters.
Material
Depending on the sensor type, material characteristics
(Default/Mat/Reflective/Custom) can be stored here.
Fixed track measure-
ment
Here, the fixed track measurement can be parameterized.
The threshold values for an article which are necessary for surveillance of the produc-
tion can either be set manually or by tolerance (relative to setpoint) and are defined as
follows:
Summary of Contents for 4350127.347
