Page 7
Overview, Technical Data, Safety Instructions
thicknessCONTROL MTS 8202.LLT / 4350127.347
1.3
Safety
System operation assumes knowledge of the operating instructions.
1.3.1 Symbols Used
The following symbols are used in these operating instructions:
CAUTION
Indicates a hazardous situation which, if not avoided, may result in
minor or moderate injury.
NOTICE
Indicates a situation that may result in property damage if not avoid-
ed.
Indicates a user action.
i
Indicates a tip for users.
Measurement
Indicates hardware or a software button/menu.
1.3.2 Intended Use
-
The MTS 8202.LLT measuring system is used for non-contact thickness measure-
ments of belts/strips and plates.
-
The measuring system must only be operated within the limits specified in the techni-
cal data
-
The measuring system must be used in such a way that no persons are endangered
or machines are damaged in the event of malfunction or total failure of the measuring
system.
-
Take additional precautions for safety and damage prevention in case of safety-related
applications.
1.3.3 Hazards
2
1
1
Target/Measure-
ment object
1
2
Sensors
Fig. 4 Danger at the measuring system
-
Warnings:
Crushing or impact hazard caused by uncontrolled movement or moving parts of the
measuring system.
> Risk of injury
Risk of the machine being remote-controlled.
> Risk of injury
Avoid shocks and impacts to the measuring system.
> Damage to or destruction of the sensors
Avoid contact with the measured object
> Damage to or destruction of the sensors
Protect the cables from damage.
> Failure of the measuring device
Protect air hoses and water-carrying hoses, and avoid heavy contamination, e.g., on the
sensor or on possible cooling units.
> Failure of the measuring device
Personnel training must also include the safety aspects.
-
Improper use: Any use other than that listed above is prohibited. Hazards can occur
1
Characteristics of target
material:
Width:
min. 1000 mm
max. 3300 mm
Thickness:
min. 6.5 mm
max. 280 mm
CAUTION
NOTICE
Summary of Contents for 4350127.347
