MICRO-EPSILON 4350127.347, Operating Instructions Manual

Page: 67 / 68

Page 67
Appendix
thicknessCONTROL MTS 8202.LLT / 4350127.347
9. Appendix
9.1 Mechanical Equipment Documentation
The installation site should preferably be free of contaminants such as dust or fumes. These can result in measure-
ment uncertainties. If needed, use an optional air purging function on the sensors to reduce the accumulation of dust,
etc. on the glass panes for the laser and the receiver.
The installation site should be free of vibration.
The DWF-Viewer program on the supplied CD must be installed to display the design. Using this tool, all the individu-
al components of the system can be displayed after opening file 4350127(347)-03.dwf.
80
0
505
2005 2335
2460
2595 3080 3320
laserline
2138
-2450
2095
53
0
206
263
(measurement range 1+2 start) 358
(measurement range 1 end) 479 479
(measurement range 2 end) 773
1225
(passline material 1) 384
(passline material 2) 403
1026
[b]
1656
[b]
1984
<-- travel range 2450
A
Fig. 62 Dimensional drawing of measuring system, dimensions in mm (inches), not to scale
Use M6 screws to install the measuring system.
9.2 Terminal and Circuit Diagrams
9.3 Technical Data
9.4 scanCONTROL LLT 2900-100 Manual
9.5 Manual UPS
9.6 Through-Beam Light Barrier Manual