METREL EurotestXE, Instruction Manual

Page: 108 / 114

MI 3102(H) BT
–
Eurotest XE Appendix B
– Accessories
108
Appendix B
– Accessories for specific
measurements
The table below presents recommended standard and optional accessories required for specific
measurement. Please see attached list of standard accessories for your set or contact your
distributor for further information.
Function
Suitable accessories (Optional with ordering code A….)
Insulation resistance

Test lead, 3 x 1.5 m

Tip commander (A 1401)

2.5 kV test lead (2 x 1.5 m)*
R LOWΩ resistance
Continuity

Test lead, 3 x 1.5 m

Tip commander (A 1401)

Test lead, 4 m (A 1012)
Line impedance
Voltage drop
Fault loop impedance

Test lead, 3 x 1.5 m

Plug commander (A 1314)

Mains measuring cable

Tip commander (A 1401)

Three-phase adapter with switch (A 1111)
Earth connection resistance

Test lead, 3 x 1.5 m

Plug commander (A 1314)

Mains measuring cable

Tip commander (A 1401)
RCD testing

Test lead, 3 x 1.5 m

Plug commander (A 1314)

Mains measuring cable

Three-phase adapter with switch (A 1111)
Earth resistance - RE

Test lead, 3 x 1.5 m

Earth test set, 3-wire, 20 m (S 2026)

Earth test set, 3-wire, 50 m (S 2027)
Earth resistance - two clamps

Test lead, 3 x 1.5 m

AC current clamp (A 1018)

AC current clamp (A 1019)

AC/ DC current clamp (A 1391)
Specific earth resistance -



Adapter (A 1199)
Phase sequence

Test lead, 3 x 1.5 m

Three-phase adapter (A 1110)

Three-phase adapter with switch (A 1111)
Voltage, frequency

Test lead, 3 x 1.5 m

Plug commander (A 1314)

Mains measuring cable

Tip commander (A 1401)
Power
Harmonics

Test lead, 3 x 1.5 m

Mains measuring cable

Plug commander (A 1314)

Tip commander (A 1401)

AC current clamp (A 1018)

AC current clamp (A 1019)

AC/ DC current clamp (A 1391)
Current

AC current clamp (A 1018)

AC current clamp (A 1019)

AC/DC current clamp (A 1391)
Sensor

Luxmeter sensor, type B (A 1172)