MI 3102(H) BT
Eurotest
XE
Preface
6
1 Preface
Congratulations on your purchase of the Eurotest instrument and its accessories from METREL.
The instrument was designed on a basis of rich experience, acquired through many years of
dealing with electric installation test equipment.
The Eurotest instrument is a professional, multifunctional, hand-held test instrument intended to
perform all the measurements on a.c. electrical LV installations.
The following measurements and tests can be performed:
Voltage and frequency,
Continuity tests,
Insulation resistance tests,
Diagnostic tests (MI 3102H BT only),
RCD testing,
Fault loop / RCD trip-lock impedance measurements,
Line impedance / Voltage drop,
Phase sequence,
Earth resistance tests,
Current measurements,
Power and harmonics measurements,
Illumination,
First fault current (MI 3102 BT only),
Testing of insulation monitoring devices
– IMD (MI 3102 BT only) and
Pre-defined auto-sequences.
The graphic display with backlight offers easy reading of results, indications, measurement
parameters and messages. Two LED PASS/FAIL indicators are placed at the sides of the LCD.
The operation of the instrument is designed to be as simple and clear as possible and no
special training (except for the reading this instruction manual) is required in order to begin
using the instrument.
In order for operator to be familiar enough with performing measurements in general and their
typical applications it is advisable to read METREL handbook
Guide for testing and
verification of low voltage installations
.
The instrument is equipped with the entire necessary accessory for comfortable testing.
