MI 3102(H) BT
Eurotest
XE
Data handling
86
7.6.2 Bluetooth communication
The internal Bluetooth module enables easy communication via Bluetooth with PC and Android
devices.
How to configure a Bluetooth link between instrument and PC
Switch On the instrument.
On PC configure a Standard Serial Port to enable communication over Bluetooth link
between instrument and PC. Usually no code for pairing the devices is needed.
Run the
EurolinkPRO
program
.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to communicate with the PC.
How to configure a Bluetooth link between instrument and Android device
Switch On the instrument.
Some Android applications automatically carry out the setup of a Bluetooth connection. It
is preferred to use this option if it exists.
This option is supported by Metrel's Android applications.
If this option is not supported by the selected Android application then configure a
Bluetooth link via Android device’s Bluetooth configuration tool. Usually no code for
pairing the devices is needed.
The instrument and Android device are ready to communicate.
Notes
:
Sometimes there will be a demand from the PC or Android device to enter the code.
Enter code ‘NNNN’ to correctly configure the Bluetooth link.
The name of correctly configured Bluetooth device must consist of the instrument type
plus serial number, eg.
MI 3102BT-12240429I
. If the Bluetooth module got another
name, the configuration must be repeated.
In case of serious troubles with the Bluetooth communication it is possible to reinitialize
the internal Bluetooth module. The initialization is carried out during the Initial settings
procedure. In case of a successful initialization “INTERNAL BLUETOOTH SEARCHING
OK!” is displayed at the end of the procedure. See chapter
