MI 3102(H) BT
Eurotest
XE
Instrument operation
31
Note:
Initial settings (reset of the instrument) can be recalled also if the TAB key is pressed
while the instrument is switched on.
4.4.9 Clamp Settings
In
Clamp settings menu
the C1 measuring
input can be configured.
Figure 4.13: Configuration of current clamp
measuring input
Parameters to be set:
Model
Model of current clamp
[A1018, A1019, A1391].
Range
Measuring range of current clamp
[20 A], [40 A, 300 A].
Selection of measuring parameters
Keys:
UP / DOWN
Selects appropriate option.
TEST
Enables changing data of selected parameter.
MEM
Saves settings.
ESC
Exits back to clamp settings menu.
Function selector
Exits back to main menu without changes.
Changing data of selected parameter
Keys:
UP / DOWN
Sets parameter.
TEST
Confirms set data.
MEM
Saves settings.
ESC
Disable changing data of selected parameter.
Function selector
Exits back to main menu without changes.
Note:
Measuring range of the instrument must be considered. Measurement range of current
clamp can be higher than of the instrument.
